Indoor Mini Dome Hardware Manual D91, D92, E91, E92, E93, E94, E95 Ver. 2013/08/27
www.acti.com Hardware Manual 10 Surface Mount 1. Mark the location of the screw holes base on the drill template included in the pa
www.acti.com Hardware Manual 11 3. Use the camera body and locate the three (3) screw holes. 4. Install the camera body to the
www.acti.com Hardware Manual 12 5. Connect the Ethernet cable to the Ethernet port of the camera. 6. Adjust the camera viewing ang
www.acti.com Hardware Manual 13 Gang Box Mount In case the camera has to be installed on a gang box, use the PMAX-0803 Indoor Gang
www.acti.com Hardware Manual 14 2. Locate and mark the three (3) screw holes on the Gang Box Converter that will be used to attach
www.acti.com Hardware Manual 15 4. With the screw location marked on step 2, secure the camera to the Gang Box Converter using the
www.acti.com Hardware Manual 16 Basic Connections Follow the procedures below to connect the camera to the network.
www.acti.com Hardware Manual 17 Accessing the Camera Configure the IP Addresses In order to be able to communicate with the camera
www.acti.com Hardware Manual 18 By double-clicking with the left mouse on the camera model, it is possible to automatically la
www.acti.com Hardware Manual 19 Using the Default Camera IP Address If there is no DHCP server in the given network, the user may ha
www.acti.com Hardware Manual 2 Table of Contents Precautions 3 Safety Instructions ...
www.acti.com Hardware Manual 20 Manually adjust the IP addresses of multiple cameras: If there are more than 1 camera to be used in
www.acti.com Hardware Manual 21 Access the Camera Now that the camera and the PC are both having their unique IP addresses and are u
www.acti.com Hardware Manual 22 Assuming that the camera’s IP address is 192.168.0.100, you can access it by opening the Web browse
www.acti.com Hardware Manual 23 Other Adjustments and Accessories Adjust the Viewing Angle and Focus 1. Loosen the three (3) screws
www.acti.com Hardware Manual 24 3. Attach the focus tuner (included in the camera package) on the lens and adjust the focus of the
www.acti.com Hardware Manual 25 Replace the Dome Cover For more discrete surveillance needs, the pre-installed dome cover can be rep
www.acti.com Hardware Manual 26 3. Remove the ring from the cover. 4. Insert ring to the new dome cover and latch it to the cover
www.acti.com Hardware Manual 3 Precautions Read these instructions You should read all the safety and operating instructions before
www.acti.com Hardware Manual 4 Federal Communications Commission Statement This equipment has been tested and found to comply with t
www.acti.com Hardware Manual 5 Safety Instructions Cleaning Disconnect this video product from the power supply before cleaning. At
www.acti.com Hardware Manual 6 Introduction List of Models This hardware manual contains the following models: D91 1MP Indoor Mini
www.acti.com Hardware Manual 7 Package Contents Mini Dome Camera Screw Kit
www.acti.com Hardware Manual 8 Physical description 1) Ethernet Port The Ethernet port connects to a network using an Ethernet ca
www.acti.com Hardware Manual 9 Installation Procedures Mount the Camera Before mounting the camera, remove the dome cover by looseni
Commentaires sur ces manuels