ACTi KCM-3311 Manuel d'utilisateur

Encoder Firmware V4.06.09 User’s Manual KCM-3311 3.6x Zoom H.264 4-Megapixel IP D/N PoE Indoor Dome with P-Iris, Advanc

www.acti.com Hardware Manual 10 Method 2: Using the Flush Mount You can use the PMAX-1008 flush mount to mount the camera on ceiling

www.acti.com Hardware Manual 11 2) Remove the Camera Casing Remove the three (3) screws to detach the camera casing.

www.acti.com Hardware Manual 12 3) Prepare the Flush Mount 1. Unpack the flush mount. 2. Peel off the lining of the three (3)

www.acti.com Hardware Manual 13 4) Attach the Camera to the Mount 1. Align the screw holes on the camera to the screw holes on the

www.acti.com Hardware Manual 14 5) Loosen the Retaining Brackets Using a screwdriver, loosen the retaining brackets according to

www.acti.com Hardware Manual 15 6) Connect the Network Cable Route the network cable to pass through the gap of the mount and conne

www.acti.com Hardware Manual 16 2. Position the retaining brackets to hold the mount on the ceiling. NOTE: The following illustrati

www.acti.com Hardware Manual 17 8) Position the Lens The camera has zoom lens and auto focus capabilities so you do not need to man

www.acti.com Hardware Manual 18 10) Attach the Flush Mount Cover 1. Align the metal latches and the latches on the flush mount co

www.acti.com Hardware Manual 19 How to Reset or Reposition the Lens of the Mounted Camera In case you need to reset the camera or re

www.acti.com Hardware Manual 2 Table of Contents Precautions ... 3 Safety

www.acti.com Hardware Manual 20 Adjusting the Viewing Angle Camera Parts Overview Adjustment Procedures 1. Loosen the tilt adjust

www.acti.com Hardware Manual 21 NOTE: If you need to tighten or loosen the pan adjustment knob and adjustment by hand is not enough,

www.acti.com Hardware Manual 22 Accessing the Camera If you have DHCP server / router in your network: Many network server / routers

www.acti.com Hardware Manual 23 4. Open Internet Explorer (Version 6.0 or above) , and type in the Default IP: 192.168.0.100 5. Wh

www.acti.com Hardware Manual 24 If you are using multiple devices, you need to change the current device to another unused IP addre

www.acti.com Hardware Manual 3 Precautions Read these instructions You should read all the safety and operating instructions before

www.acti.com Hardware Manual 4 Safety Instructions Cleaning Disconnect this video product from the power supply before cleaning. At

www.acti.com Hardware Manual 5 Introduction Package Contents KCM-3311 QIG Accessories

www.acti.com Hardware Manual 6 Physical Description 1) Reset Button Step 1: Switch off IP device by disconnecting the power cable

www.acti.com Hardware Manual 7 2) Power Button Press the Power Button and then camera will reboot automatically. 3) Ethernet Port

www.acti.com Hardware Manual 8 Installation The camera can be directly installed on walls or mounted in the ceilings using mounting

www.acti.com Hardware Manual 9 3) Screw the camera to the wall/ceiling CAUTION: When using electric screwdrivers, be careful not