Acti B51 Manuel d'utilisateur télécharger pdf (Page 21)

www.acti.com

Hardware Manual

Step 2: Open the Dome Cover

NOTE: To avoid scratches or leaving fingerprints on the dome cover, it is recommended to retain

the plastic covering the dome cover until the camera is completely installed.

1. With the bundled hex screwdriver, loosen the three (3) screws securing the dome cover.

2. Lift to remove the dome cover.

3. If the cables will be routed along the ceiling or wall, remove the cable tab from the dome

cover.

4. If the cables will pass through the ceiling or wall, route and pull the cables through the

hole on the surface.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Pas de commentaire

Acti B51 Manuel d'utilisateur Page 21