ACTi ENR-140 Guide d'installation télécharger pdf (Page 52)

www.acti.com

ENR-100 Series System Administrator’s Manual

Network Settings

There are two network interface cards in ENR. Either of these cards can be supported by the

built-in DHCP server feature, which enables ENR to assign IP addresses to cameras via

LAN1 or LAN2 port without another DHCP on router.

Go to Setup page  Network tab

The current settings of both LANs will be displayed here.

By default, LAN1 card is set to Manual mode with a fixed IP address 192.168.0.10, while

LAN2 is in DHCP client mode. It is suggested that you connect LAN1 to LAN and connect

LAN2 to WAN.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 138 139

Pas de commentaire

ACTi ENR-140 Guide d'installation Page 52