ACTi ENR-1000 Guide d'installation télécharger pdf (Page 18)

www.acti.com

ENR-1000 System Administrator’s Manual

Network Connection Architecture

When connecting ENR with your network, please make sure you plug the network cable into

the right port.

LAN 1 Port

LAN 1 port is the default camera port for a typical local network. Via this port, the DHCP

server built in ENR automatically assigns IP addresses to network cameras once they are

connected. With this feature, you do not have to bother arranging the camera IP addresses on

your own. By default, this DHCP server is enabled, so please avoid connecting ENR to a

network with another DHCP server via this port.

Connection Setting Example 1

Below diagram displays an example connection setting using only LAN1 to connect networks

cameras.

In this setting, ENR altogether with cameras are within the same network segment; in the

mean time, there is no need of referencing outside DHCP server in this system.

LAN 1

Port (Camera Port)

Default:

192.168.0.10

LAN 2

Port (WAN Port)

Default:

Dynamic /192.168.1.10

192.168.0.101 ~ 192.168.0.104

LAN 1: 192.168.0.10

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 54 55

Pas de commentaire

ACTi ENR-1000 Guide d'installation Page 18