ACTi ACM-5711 Guide d'installation télécharger pdf (Page 3)

0-2

1.2 PHYSICAL DESCRIPTION

1. Ethernet Port

The IP device connects to the Ethernet via a standard RJ45

connector. Supporting NWAY, this IP device can auto detect the

speed of local network segment (10Base-T/100Base-TX

Ethernet).

2. Reset Button

Step 1: Switch off IP device by disconnecting the power cable

Step 2: Press and continue to hold the Reset Button. Reconnect the

power cable while continuing to hold the reset button.

Step 3: Keep holding the reset button depressed around 6 seconds,

release the reset button. The unit will start up with factory default

settings.

3. Audio Input / Output

The IP device supports audio input and output with earphone jack

4. Action LED Indicator

The LED will light up after IP camera has successfully completed

the boot process

5. The I/O Terminal Connector

Used in applications for e.g. motion detection, event triggering,

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

ACTi ACM-5711 Guide d'installation Page 3