ACTi E41A Guide d'installation télécharger pdf (Page 16)

www.acti.com

Installation Guide

2. Secure the clamping nut to the body.

NOTE: Make sure the clamping nut is tight to avoid possible water leak.

Step 6: Connect the Ethernet Cable

1. Connect the Ethernet cable to the Ethernet port inside the camera.

2. When done, close the back cover by tightening the three (3) screws.

NOTE: Make sure the rubber ring on the cover is secured and the screws are completely

tightened to avoid possible water leak.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Pas de commentaire

ACTi E41A Guide d'installation Page 16