ACTi E41A Guide d'installation télécharger pdf (Page 25)

www.acti.com

Installation Guide

4. Tighten the sealing nut.

NOTE: Make sure the rubber seal is tightly squeezed to avoid possible water leak.

5. Attach the back cover by tightening the three (3) screws.

NOTE: Make sure the rubber ring on the cover is secured and the screws are completely

tightened to avoid possible water leak.

Step 5: Install the Camera

1. Align the screw holes of the holder to the bottom screw holes of the camera.

Rubber must be

squeezed tightly

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Pas de commentaire

ACTi E41A Guide d'installation Page 25